Choosing a master cylinder Help

Discussion in 'STT General Discussion' started by Charles, Sep 16, 2022.

  1. Charles

    Charles n00b

    Joined:
    Jun 9, 2022
    Messages:
    3
    Likes Received:
    1
    Hi all! Not sure where to post this so please move as needed.

    Went down at BHF last week and thought all was fine with my bike, just needed new brake pads. Installed them today with new motul 660 brake fluid. While bedding them my front brakes started seizing and the only way to relieve pressure was to release at the caliper.

    Disassembled calipers and cleaned, they were in great shape, seals are good and no issues. Went to look at the master cylinder and noticed some abnormal wear/marks and am guessing it needs to be replaced.

    I could go with OEM but figured Id look at Brembo but have no idea how to select for a 2007 636.

    Can anyone offer assistance or suggestions? Im signed up for ACC 9/24 and really need a solution fast.

    Thank you so much in advance!
     
  2. R/T Performance

    R/T Performance found track bike
    STT Staff

    Joined:
    Jul 10, 2011
    Messages:
    966
    Likes Received:
    173
    grab a brembo from a 08+ r6 usually find them used reasonable and are a great master still budget friendly
     
  3. Charles

    Charles n00b

    Joined:
    Jun 9, 2022
    Messages:
    3
    Likes Received:
    1
    Thanks! Ended up grabbing a cylinder, definitely fixed it
     
    R/T Performance likes this.

Share This Page