For sale is my 2007 Honda CBR600RR which comes with a clean title. I originally purchased this bike used in 2009 as my primary street bike. I did a few track days in 2011 and 2012 and converted it to track only in 2013. The bike has been down a few times. There is a dent on the left side of the tank under the tank cover, no leaks. The lower engine crank case was damaged in a crash I had in 2012 but was repaired. A small crankcase crack was sealed, the engine case hole was retapped, and a helicoil was put in. Since the repair there have been no issues with the engine and the bike starts and runs great. As you can see from the pictures the body work is pretty rough. Someone that has the space, time, and patience could repair for relatively cheap. I had purchased a used subframe to replace a bent one and it is slightly off true. This caused the exhaust mounts not to line up exactly so I had to use a strap to hang the exhaust. The brakes are probably due for a rebuild as well. I also have a few spare parts that will be included. For those interested I do have most if not all of the parts to convert it back to street. They are beat up and the body work on one side is pretty much unusable, but the lights and signals should all still work (I haven't checked them in years). Miles: 14,718 Evotech front and rear axle slider spools Woodcraft frame sliders Woodcraft clipons Optimal Race bodywork (pretty rough shape but gets the job done) Racetech G2-R fork cartridges (setup for ~170-180 lbs rider) Racetech GS-3 Shock (setup for ~170-180 lbs rider) Brembo master cylinder Steel braided brake lines Yana Shiki Engine Cover Set Safety wired for racin Front Caliper mounting bolts Pinch bolts Oil Drain bolt Oil Filter Oil Filler Cap Radiator Hoses Located in downtown Chicago, IL. Video of the bike startup and running: Asking $3000, reasonable offers considered. Local pickup or you arrange shipping. Thanks for looking!