These are from a 2005 Honda CBR 600 F4i. THESE WHEELS ARE IN GREAT SHAPE.... SO ARE THE ROTORS AND TIRES!!!! WHEELS: I used the wheels for a couple track days and very limited street use. They ride straight and true. I specifically used this wheel/rotor combo for the track because of how clean they rode. Not that my other wheel/rotor combo was bad, but these were noticably better. The wheels dont have any large scratches or damage. Just a few unavoidable nicks in the paint from tire changes. No issues noted with the wheel bearings or anything like that. it. ROTORS: these rotors a also in great shape. There is A LOT of life left in them. Yes i did a couple track days with them, but i am a (slow) intermediate group rider. So i am not really burning through rotors in a single weekend. I can provide disk thinkness measurements if you want. I noticed no pulsing when hard braking. I havent tested the runout but i am nearly certain they would fall well within tollerance. TIRES: I would guess they are about 80-90% life remaining. The specs on the tires are: - front: Dunlop Sportmax Q2 120/70 ZR17 - rear: Dunlop Sportmax Q2 180/55 ZR17 OTHER: I also have and extra rear rotor, wheel spacer, and cush drive set which are pictured above. Overall, you wont find a cleaner set of wheels, tires, and rotors for this generation of bike. And i believe they fit other models too (like the F4) but check with your dealer to be sure. Sorry the picture above isnt the best. I can send better pics via pm. I am in the western burbs of chicago. I will consider reasonable offers
Forgot price: i am looking to get $250 for everything. If you dont like the price, feel free to make an offer. It probably wont hurt my feelings
Hi Doug. I could put your stuff to good use. only problem, I'm in mid michigan . Between Lansing and Grand Rapids.Going to be At Grattan this weekend. You or any friends going thru ? Thanks for your Time Kurt
Hi kurt - unfortunately i wont be headed out there. It sounds like your weekend plans will be much more fun than mine. If you are open to meeting somewhere in between, that might work. Maybe michigan city or something? Let me know what you are thinking.
Thanks for the offer to meet . that's about a 5 hour round trip for me. I know it would be a pain but would you consider shipping them For extra $. If that's an option I can send a money order/ cashiers check prior to you shipping. I greatly appreciate your time. Kurt
Understood and no problem. It looks like shipping to your area would be about $80 additional. Let me know if that is a deal killer. That estimate was based on two boxes. But for shipping I will take off the rotors and ship in a separate box to prevent damage. For payment, Paypal would be preferred and i think that offers you some protections as a buyer. I would provide tracking info, etc once the payment clears. Note that it looks like it would only be in transit for about a day or two using UPS ground (based on the online quote, so dont hold me to that). Also, can you confirm you would be mounting these on an F4i (or even an F4)? I may have some other spare parts laying around that I can throw in for you. Feel free to private message me if you want to move forward and we can figure out specifics. Thanks
