March Barber Roll Call

Damn Kurt... Hope he heals up.... What happened?

 

1. Practice Sunday at Roebling Road, broken front rod at the fastest part of the track. Luckily, the belly pan caught the parts and oil. He was able to ride off into the grass and keep it upright.

2. Using a borrowed bike, in the Lightweight twins superstock race, he "saved" a high-side into a low-side and dislocated and mashed his pinky under the clip-on. Set it back in place himself, trackside. But the meat getting mooshed out from under the nail is still pretty tender.

3. You need to get face book and/or send me your number and I'll text you some pics.

 

Steve, make sure to leak some information to Perrone so that he can start one of his infamous news thread... :lmao:

 

I know more than others! Lips are sealed Steve!

 

No problem! When all the details are worked out I'll start my own little thread.

 

Just 1 1/2 day and a wake up? Really just about 24 hours till I get to the track!

 

c'mon steve, SPILL IT! Lynne and I are both under the weather suffering from a cold, then got hammered with the flu. it sucks BAD! I wanna ride, at least give me something to live vicariously through Ski

 

All packed... Shrimp are thawing out now for some evening Prep to save me time tomorrow night.... See you guys there!!!

 

Trailer is mostly loaded, and rider is beyond stoked. Can't wait to get the season started with y'all.

 

So bummed I can't go.

 

Just stop by before you go and leave your beer with me.... Is there going to be a tire changer there this weekend?

 

Stop down and see the new sheephauler one day (WITHOUT SHRIMP! :fear Still getting things setup but it is much more luxury than my old one.

 

Matt will be there flipping tires:thumb:

 

1hr 15min from Barber In Alabama. Really moist outside. Hope to see all my beer... I meant friends!

 

I might sell my Sunday A spot?

 

It is right on the edge of prediction. Could be a great but cloudy day or soggy, won't know until it happens.

 

Picked up another bike last night, gonna spend all night prepping it for tmrw. :getdown:

 

Need creative ways to keep lower fairing from touching clutch side header. Can't heat wrap header because it is Ti.

 

lower fairing does not have to "hold" fluid. Just cut it out at that point. I am guessing maybe a 1.5" wide by 3" long cutout would do the trick. If you want a cleaner look, make the cutout and then attach something on the outside. There will be a bump in that section but I imagine with a little creativity, it could look ok.

 

I got some heat shield that sticks on from Advance Auto Parts when I was getting browning on my lower. It was not touching like yours so might not work but did in my case. Oh and I stuck it to the lower not the exhaust.

It does if you race