Need a Mechanic

Discussion in 'For Sale: Non Motorcycle Related' started by mattie9052, Feb 5, 2014.

  1. mattie9052

    mattie9052 Rides with no training wheels

    Joined:
    May 24, 2013
    Messages:
    452
    Likes Received:
    1
    i need a mechanic or some mechanical assistance
    Need to be mechanic or a small mechanic that is
    familiar with English cars/motorcycle.
    my my car does not seem to want to start after sitting for 3 months ,
    there is oil and gas, and battery is good.
    cranks wants to start but nothing,
    need a mechanic that is familiar with English cars or someone familar with english cars . or someone local that wants to come help be get it running,
    thanks
    matt
     
  2. dmason53

    dmason53 What's an apex?

    Joined:
    Aug 30, 2011
    Messages:
    1,340
    Likes Received:
    0
    Sorry to hear it. Buy Japanese next time.
     
  3. TLR67

    TLR67 Cheers!
    STT Staff

    Joined:
    Jan 31, 2007
    Messages:
    7,324
    Likes Received:
    814
    Location... Kind of car?
     
  4. mattie9052

    mattie9052 Rides with no training wheels

    Joined:
    May 24, 2013
    Messages:
    452
    Likes Received:
    1
    prospect heights il, near Schaumburg, if that helps,
    old mind u old bentley 8 non turbo
     
  5. mattie9052

    mattie9052 Rides with no training wheels

    Joined:
    May 24, 2013
    Messages:
    452
    Likes Received:
    1
    i have a japanese car that i daily drive, all winter, but my fav cars and trucks are english,
     
  6. TLR67

    TLR67 Cheers!
    STT Staff

    Joined:
    Jan 31, 2007
    Messages:
    7,324
    Likes Received:
    814
    Pour some Grey Poupon in the Gas Tank!!!

    Just kidding.... I would check for spark and if it is there drain the bowls on the carbs or carb... Wish I could help but I am a few states away....
     
  7. mattie9052

    mattie9052 Rides with no training wheels

    Joined:
    May 24, 2013
    Messages:
    452
    Likes Received:
    1
    thanks TLR67
    it is fuel injected, and it sparks, but does not want to start,
    i will try again, just put 2 new batteries
     
  8. bitmap317

    bitmap317 Rides with no training wheels

    Joined:
    Jul 23, 2012
    Messages:
    56
    Likes Received:
    0
    Not an expert by any means, but can you get it to fire by spraying Starting fluid into the air intake? If it does fire (probably won't stay running though) the problem might be clogged fuel injectors. I've cleared up dirty/varnished carbs by keeping an engine 'running' using starting fluid, but I'm not sure it would work on a FI engine.
     
  9. TLR67

    TLR67 Cheers!
    STT Staff

    Joined:
    Jan 31, 2007
    Messages:
    7,324
    Likes Received:
    814
    Pull an injector and test it.... Or even smell it.... Also is it a Manual or Automatic? Try bumping it with the ignition on....
     
  10. mattie9052

    mattie9052 Rides with no training wheels

    Joined:
    May 24, 2013
    Messages:
    452
    Likes Received:
    1
  11. mattie9052

    mattie9052 Rides with no training wheels

    Joined:
    May 24, 2013
    Messages:
    452
    Likes Received:
    1
    will try it once i get home.. there is nobody local that wants to work on it,
     
  12. Oz1

    Oz1 Rider

    Joined:
    Aug 20, 2013
    Messages:
    78
    Likes Received:
    5
    If your getting spark, the only other ting it could be is fuel or timing. If it ran prior to parking it, I would eliminate timing. Seeing as it sat for 3 months, I would start with bad fuel. Phase separation and varnish build up would begin in as little as a month. I would suggest draining all the fuel and adding new fuel and some Seafoam system cleaner. You'll have to clear the fuel lines too. If you disconnect the line at the fuel rail, attach some hose, running it into a catch container. Then turn key on should turn on fuel pump on, pushing left over fuel through the lines. I've used this process on various other vehicles and engines in general with success. I also have customers who have this issue on stored hot rods.

    Sent from my SCH-I545 using Tapatalk
     
  13. mattie9052

    mattie9052 Rides with no training wheels

    Joined:
    May 24, 2013
    Messages:
    452
    Likes Received:
    1
    ok, the gas cant be bad, i put stable in it. it does have a frest tank of gas now,
     
  14. steve p

    steve p What's an apex?
    STT Staff

    Joined:
    Sep 28, 2007
    Messages:
    744
    Likes Received:
    106
    Check with Micah over at AF1. He seems to do pretty good with those things.
     
  15. bock919

    bock919 Rides with no training wheels

    Joined:
    Apr 17, 2012
    Messages:
    233
    Likes Received:
    7
    Stabil isn't always the most effective way to ensure your fuel doesn't turn. Personally, I've had better luck with seafoam, but ymmv.

    Did you run the engine after putting in the stabil to ensure it cycles through the whole fuel system? If it's just sitting in the tank, the lines could still be gummed up.
     
  16. mattie9052

    mattie9052 Rides with no training wheels

    Joined:
    May 24, 2013
    Messages:
    452
    Likes Received:
    1
    i think the lines are gummed up,, i did not run it, was in a hurry to leave for NY, ,
     
  17. mattie9052

    mattie9052 Rides with no training wheels

    Joined:
    May 24, 2013
    Messages:
    452
    Likes Received:
    1
    thanks steve,

    will call him today,
     
  18. E-Van

    E-Van What's an apex?

    Joined:
    Oct 19, 2012
    Messages:
    279
    Likes Received:
    48
    As said above, a can of starting fluid will give you a good idea if it is a fuel issue.
     
  19. no0one718

    no0one718 Shaggy

    Joined:
    Oct 9, 2013
    Messages:
    147
    Likes Received:
    0
    Also check if it has a separate injector for cold starting, check that its working. have you checked for spark?
     
  20. mattie9052

    mattie9052 Rides with no training wheels

    Joined:
    May 24, 2013
    Messages:
    452
    Likes Received:
    1
    it cranks, im thinking its bad fuel, may be i will try to change the plugs, and spray the starter fuild into the cylinders, and then try to start it,
     

Share This Page